Parking Car Stopper (Pipe type)

PL-07-150
Parking Car Stopper (Pipe type)
07.10.2020
1.590

Parking car stopper (pipe type) is a car park product used in parking lots, parking garages, multi-story car parks and so on. It warns the drivers in order to prevent accidents in car parks. It is also called as metal wheel stopper, pipe type car stopper, steel parking blocks etc. Parking car stopper (pipe type) is also used in front of the shopping malls and buildings. These products also can be used for protection at electrical charging stations.

Parking car stopper (pipe type) has 180 cm length and 12 cm height. The pipe diameter is 60 mm and its thickness is 2 mm. Pipe type stopper is painted with black electrostatic powder paint. There are 3 pieces of reflective sheets on it. There are 3 holes on the flanges for mounting. Parking car stopper is fixed to the ground indissolubly with 6 pieces of 10 x 120 mm triphone screw and 16 mm plastic fixing plug. The diameter of the flanges is 180mm and the thickness are 2,50mm.

Pipe type stoppers can be produced according to the desired specifications. In accordance with your requirements, the specifications of the wheel stopper such as height, height, thickness, pipe type, color can be changed.

Technicial Specifications
  • Length: 1800 mm
  • Height: 120 mm
  • Flange: Diameter 180 mm / Thickness 2.5 mm
  • Pipe: Diameter 60 mm / Thickness 2 mm
  • Paint: Black, Electrostatic paint with yellow reflective sheets
  • Installation: 10 x 120 mm screw and 16 mm plastic plug
  • Product code: PL-07-150
Product Images
Comments

No comments yet. You can be the first filling the form below.